Celestron T-Adapter For Schmidt-Cassegrain Telescopes
Celestron T-Adapter is a must have accessory if you’d like to attach an SLR or DSLR camera to the rear cell threads of a Schmidt-Cassegrain Telescopes for prime focus photography.
Before even started, you have to get an appropriate T-Ring for your camera body (#93402 for Nikon & #93419 for Canon EOS are sold separately), then remove the lens from your camera and attach the T-ring in its place.
Next, remove the diagonal and visual back from the rear cell of your telescope. Screw the Celestron T-Adapter onto the rear cell threads until secure, thread the T-ring & camera onto the T-Adapter. That’s all there is to it.
Celestron warrants its products to be free from defects in materials and workmanship for the length of time specified by this product to the original owner. Each product will list the warranty for it on our website.
Celestron will repair or replace the product which, upon inspection by Celestron, is found to be defective in materials or workmanship and within the definitions of the limits described below.
This warranty is effective January 1, 2012, and supersedes all other warranties as noted in brochures, instruction manuals, product packaging, etc.
This warranty does not cover products that have been subject to abuse, misuse, physically damaged, altered, or had unauthorized repairs or modifications. This warranty does not cover defects due to normal wear and tear and other conditions.
Celestron shall use reasonable efforts to repair or replace any binocular or spotting scope covered by this warranty within thirty calendar days of receipt. If it takes longer, the customer will be notified.
If warranty problems arise, or if you need assistance in using your product, please contact our Customer Service.